SWITCH POE ราคา ,POE ราคา

Features
Flow control, auto-negotiation, ARP support, VLAN support, Syslog support,
port mirroring, E-mail alert, Broadcast Storm Control, STP support, RSTP support,
DHCP server, SMS alert, DAI, UDLD, LLDP support, DHCP relay, static routing,
crossover detection, BPDU, RBAC, push notification, Root Guard, Loop Guard

Compliant Standards
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP),
IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab (LLDP), IEEE 802.3at

Data Link Protocol: Gigabit Ethernet
Number of Ports: 48 Limited lifetime warranty
Cisco Meraki Cloud Managed MS355-48X - Switch - L3 - Managed
16 x 1/2.5/5/10GBase-T + 32 x 1000Base-T + 4 x 10 Gigabit SFP+ + 2 x 40 Gigabit QSFP+ - desktop, rack-mountable - UPOE

Deployment type Branch & Small campus
Interface Ports 8 x 100M/1G/2.5G/5/10G Ethernet RJ45 with auto negotiation and autoMDIX, • 16 x 1G Ethernet RJ45
Uplinks 2 × 40G (QSFP+) Fixed, 2 x 100G QSFP28
PoE capabilities None Switching capacity 352 Gbps
Throughput 262 Mpps Mac Address 32K
Power configuration Removable PSU Stacking 400G
physical + virtual Routing Static + Dynamic DHCP Server + Relay
Features Meraki switches include all of the traditional Ethernet features found in modern enterprise access switches, including
Physical dimensions 1.72” x 19.08” x 20.34” (4.37 x 48.46 x 51.66cm)
Weight 12.30 lb (5.58 kg)

Device Type Switch - 48 ports - Managed
Enclosure Type Desktop, wall-mountable 1U
Subtype 10 Gigabit Ethernet
Ports 48 x 10/100/1000 + 4 x 10 Gigabit SFP+
Performance Switching capacity: 176 Gbps ¦ Forwarding rate: 130.95 Mpps
Capacity VLANs supported: 4094
MAC Address Table Size 32000 entries
Jumbo Frame Support 9578 bytes
Remote Management Protocol SNMP

Features
Flow control, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X),
IGMP snooping, Syslog support, port mirroring, E-mail alert, Broadcast Storm Control,
firmware upgradable, STP support, RSTP support, DHCP snooping, ACL support, QoS,
SMS alert, STP Root Guard, UDLD, fanless, LACP, DHCP client, security lock slot
(cable lock sold separately), crossover detection, SSO support, RBAC, Cisco Discovery Protocol,
STP BPDU Guard, ZTP, DSCP to CoS Mutation

Compliant Standards
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1ab (LLDP)

Deployment type Small branch & office
Interface Ports 24 x 1GbE RJ45
Uplinks 4 x 10 GbE SFP Fixed
PoE capabilities 370W Switching capacity 128 Gbps
Throughput 95 Mpps Mac Address 16K
Power configuration Internal
Stacking Virtual only Routing DHCP Relay
Features Meraki switches include all of the traditional Ethernet
features found in modern enterprise access switches, including
Physical dimensions 1.73 x 17.32 x 9.84” (4.40 x 44 x 25cm)
Weight 9.26 lb (4.2 kg)

Device Type Switch - 12 ports - L3 - Managed - stackable
Enclosure Type Rack-mountable 1U Subtype Gigabit Ethernet
Ports 12 x 10/100/1000 (PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+ (uplink) + 2 x 10/100/1000
Power Over Ethernet (PoE) PoE+ PoE Budget 139 W
Performance Throughput: 41.7 Mpps ¦ Switching capacity: 68 Gbps
Latency (1 Gbps): 3.8 µs ¦ Latency (10 Gbps): 1.6 µs Capacity Jumbo frame size: 9220
IPv4 routing table entries: 2000 ¦ IPv6 routing table entries: 1000
MAC Address Table Size 32K entries

S5731-H48P4XC

S5731-H24P4XC

Forwarding Performance 96 Mpps, Switching Capacity2 128 Gbit/s/336 Gbit/s
Fixed Ports 24 x 10/100/1000Base-T ports, 4 x 10 GE SFP+ ports, PoE+ Supported
MAC Features MAC address auto-learning and aging, Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses, Interface-based MAC address learning limiting
VLAN Features 4094 VLANs, Guest VLAN, Voice VLAN,GVRP,MUX VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN mapping