[C9105AXW-S] Cisco Catalyst 9105AX Series-Wallplate

ประเภทสินค้า อุปกรณ์ Access Point Indoor

Part numbers

Cisco Catalyst 9105AX Access Point: Indoor environments, with internal antennas

● C9105AXI-x: Cisco Catalyst 9105 Series
Cisco Catalyst 9105AX Access Point: Wall Plate, with internal antennas

● C9105AXW-x: Cisco Catalyst 9105 Series
Cisco Catalyst 9105AX Teleworker Access Point: Indoor environments, with internal antennas

● C9105AXIT-x: Cisco Catalyst 9105 Series
(Shipped along with Infrastructure kit - Power Injector and Ethernet Cables)
Cisco Catalyst 9105AX Teleworker Access Point: Wall Plate, with internal antennas

● C9105AXWT-x: Cisco Catalyst 9105 Series
(Shipped along with Wall Plate kit - Cradle and Ethernet Cables)
Cisco Catalyst 9105AX Access Point: Indoor environments, with internal antennas, with embedded wireless controller

● C9105AXI-EWC-x: Cisco Catalyst 9105 Series
Regulatory domains: (x = regulatory domain)

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.

Cisco Wireless LAN Services

● AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service
● AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service
● AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service
Accessories

● Mounting bracket: AIR-AP-BRACKET-W4= (available as spare)
● Spacer kit: C9105AXW-KIT (sold separately)
Software

Catalyst 9105 AXI

● Cisco Unified Wireless Network Software Release 8.10.MR3 or later
● Cisco IOS ® XE Software Release 17.3.1, or later
Catalyst 9105AXW

● Cisco Unified Wireless Network Software Release 8.10MR3 or later
● Cisco IOS ® XE Software Release 17.3.1 or later
Supported wireless LAN controllers

● Cisco Catalyst 9800 Series Wireless Controllers
● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities

● 2x2 MIMO with two spatial streams
● Maximal Ratio Combining (MRC)
● 802.11n and 802.11a/g
● 20- and 40-MHz channels
● PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support
802.11ac

● 2x2 downlink MU-MIMO with two spatial streams
● MRC
● 802.11ac beamforming
● 20-, 40-, 80- MHz channels
● PHY data rates up to 866.7 Mbps (80 MHz with 5GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA3 support
802.11ax

● 2x2 uplink/downlink MU-MIMO with two spatial streams
● Uplink/downlink OFDMA
● TWT
● BSS coloring
● MRC
● 802.11ax beamforming
● 20-, 40-, 80- channels
● PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz)
● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
● 802.11 DFS
● CSD support
● WPA3 support
Integrated antenna

Catalyst 9105AXW

● 2.4 GHz: Peak gain 3 dBi, internal antenna
● 5 GHz: Peak gain 5 dBi, internal antenna
Catalyst 9105AXI

● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
● 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
Interfaces

Catalyst 9105AXW

● 1x 100/1000/2500 Base-T (Ethernet) Uplink Interface
● 3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget)
● Management console port (RJ-45)
● USB 2.0 at 4.5W
● Passthru Port
Catalyst 9105AXI

● 1x 10/100/1000 Base-T (Ethernet) Uplink Interface
● Management console port (RJ-45)
Indicators

● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions
(W x L x H)

● Access point (without mounting brackets):
◦ C9105AXW: 3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm)

◦ C9105AXI: 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm)

Weight

Cisco Catalyst 9105AXW

● 0.8 lb. (373.2g)
Cisco Catalyst 9105AXI

● 0.7 lb. (329.5g)