ผลการค้นหา

Highlights

Built-in Broadcom 7nm DSP Chip, Max. Power Consumption 18W
Parameter Tests for Superior Performance, Quality, and Reliability
Dual-interface Design Enables Flexible 2x 400G or 8x 100G Breakout Networking
Supports the Use of a Single Port for 1x 400G Applications
8x 106.25G PAM4 Retimed 8x 100GAUI-1 C2M Electrical Interface
High-speed Connectivity Compliant to IEEE P802.3ck and IEEE 802.3cu
Hot Pluggable QSFP-DD MSA Compliant

Highlights

The 800GBASE-FR4 QSFP-DD Optical Transceiver Module is designed for 800GBASE Ethernet throughput up to 2km
over eight pairs of singlemode fiber (SMF) with Dual Duplex LC/UPC connectors. This transceiver is compliant
with IEEE P802.3ck, IEEE 802.3cu, QSFP-DD MSA. This module has 2 duplex LC connectors

Highlights

Built-in Broadcom 7nm DSP Chip, Max. Power Consumption 19W
Parameter Tests for Superior Performance, Quality, and Reliability
Dual-interface Design Enables Flexible 2x 400G or 8x 100G Breakout Networking
Supports the Use of a Single Port for 1x 400G Applications
8x 106.25G PAM4 Retimed 8x 100GAUI-1 C2M Electrical Interface
High-speed Connectivity Compliant to IEEE P802.3ck and IEEE 802.3cu
Hot Pluggable QSFP-DD MSA Compliant

Highlights

The 400GBASE-ER8 module, Duplex LC connector, up to 40km over parallel single-mode fiber.
It is compliant to IEEE 802.3cn protocol and 400GAUI-8, QSFP-DD HW Rev 5.0 and
QSFP-DD CMIS Rev 4.0 standard.

Highlights

The 400GBASE-SR4 module, MTP/MPO-12 connector, up to 100m over parallel OM4 multi-mode fiber.
It is compliant to IEEE 802.3bs protocol and 400GAUI-8 standard.
The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane.
It can support 2 x 200G-SR and 4 x 100G-SR.

Highlights

The 400GBASE-FR4 module, Duplex LC connector, up to 2km over parallel single-mode fiber.
It is compliant to IEEE 802.3bs, 400GBASE-FR4 Spec of 100G Lambda MSA group,
and 400GAUI-8/CEI-56G-VSR-PAM4 standards.
The 400 Gigabit Ethernet signal is carried over four CWDM grid optical wavelengths.
Multiplexing and demultiplexing of the four wavelengths are managed within the device.

Highlights

The 400GBASE-DR4 module, MTP/MPO-12 connector, up to 500m over parallel single-mode fiber.
It is compliant with QSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards.
The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane.
It can be used as 4x100G breakout to QSFP-DR-100G. It is a cost-effective and lower power
consumption solution for 400GBASE data center.

Highlights

The 400GBASE-LR8 module, Duplex LC connector, up to 10km over parallel single-mode fiber.
It is compliant to IEEE 802.3bs protocol and 400GAUI-8/CEI-56G-VSR-PAM4 standard.
The 400 Gigabit Ethernet signal is carried over eight wavelengths. Multiplexing and
demultiplexing of the eight wavelengths are managed within the device.

Highlights

The Tconnect TCM200GSR8 Compatible QSFP-DD transceiver supports up to 100m link lengths
over multimode fiber (MMF) via MTP/MPO-24 connectors.
This transceiver is compliant with IEEE 802.3bm and QSFP-DD MSA standards. The built-in
digital diagnostics monitoring (DDM) allows access to real-time operating parameters.
It is suitable for 2×100GBASE-SR4 Ethernet, Data Centers and Switch & Router Connections.

Highlights

Hot-pluggable QSFP-DD form factor
4 channels full-duplex transceiver module
Transmission data rate up to 212.5Gb/s
4x50G PAM4 EML LAN-WDM transmitter and PIN receiver
Low power consumption < 7W
Maximum link length of 40km on SMF
Duplex LC receptacles