ผลการค้นหา
[TCM200GSR8] TConnect 200G QSFP-DD SR8 850nm 70m/100m OM3/OM4 MTP/MPO MMF Optical Transceiver Module
Highlights
The Tconnect TCM200GSR8 Compatible QSFP-DD transceiver supports up to 100m link lengths
over multimode fiber (MMF) via MTP/MPO-24 connectors.
This transceiver is compliant with IEEE 802.3bm and QSFP-DD MSA standards. The built-in
digital diagnostics monitoring (DDM) allows access to real-time operating parameters.
It is suitable for 2×100GBASE-SR4 Ethernet, Data Centers and Switch & Router Connections.
[TCM200GER4] TConnect 200G QSFP-DD ER4 LWDM4 40km LC SMF FEC Optical Transceiver Module
Highlights
Hot-pluggable QSFP-DD form factor
4 channels full-duplex transceiver module
Transmission data rate up to 212.5Gb/s
4x50G PAM4 EML LAN-WDM transmitter and PIN receiver
Low power consumption < 7W
Maximum link length of 40km on SMF
Duplex LC receptacles
[TCM200GLR8] TConnect 200G QSFP-DD LR8 LWDM8 10km LC SMF FEC Optical Transceiver Module
Highlights
Hot-pluggable QSFP-DD form factor
4 channels full-duplex transceiver module
Transmission data rate up to 212.5Gb/s
4x50G PAM4 EML LAN-WDM transmitter and PIN receiver
Low power consumption < 7W
Maximum link length of 10km on SMF
Duplex LC receptacles
[TCM40GSRBD] TConnect 40GBASE-SR BD QSFP+ 850nm 150m LC DOM Transceiver Module
Highlights
The QSFP+ module adopts 12 Fibers MTP/MPO Male connectors, reaching a link up to 150m
over OM4 MMF (100m over OM3). This transceiver is compliant with QSFP+ MSA,
IEEE 802.3ba 40GBASE-SR4 and breakout to 4x10GBASE-SR standard.
[TCM10G13ER] TConnect 10GBASE-ER 40km 1310nm SFP+ Optical Transceiver
Highlights
SFP+ transceiver supports up to 40km link lengths over OS2 SMF via an LC duplex connector. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Each SFP+
transceiver module is individually tested to be used on a series of Cisco switches, routers, servers,
network interface card (NICs) etc.
[TCM10GBI1312-10] Tconnect 10GBASE SFP+ BiDi Transceiver Module SMF, 1330nm-TX/1270nm-RX, 10km, LC
Highlights
compatible SFP+ transceiver supports up to 10km link lengths over OS2 SMF via an LC simplex connector.
This 10G BiDi SFP+ transceiver, featured with data transmission over a single strand of fiber,
the one transceiver transmits a 1330-nm channel and receives a 1270-nm signal, whereas the
other BiDi SFP+ optics transmits at a 1270-nm wavelength and receives a 1330-nm signal.
[TCM10GBI1213-10] Tconnect 10GBASE SFP+ BiDi Transceiver Module SMF, 1270nm-TX/1330nm-RX, 10km, LC
Highlights
compatible SFP+ transceiver supports up to 10km link lengths over OS2 SMF via an LC simplex connector.
This 10G BiDi SFP+ transceiver, featured with data transmission over a single strand of fiber,
the one transceiver transmits a 1270-nm channel and receives a 1330-nm signal, whereas the
other BiDi SFP+ optics transmits at a 1330-nm wavelength and receives a 1270-nm signal.
[Finisar R6B19A] Finisar B-series 4x50Gb QSFP56 Short Wave Inter Chassis Link 1-pack Secure Transceiver
Finisar R6B19A
[Finisar SFP-50G-SL] Finisar 25/50G-SL SFP56 Short Link Module
Finisar SFP-50G-SL