ผลการค้นหา

Highlights

QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 100m
over OM4 multimode fiber (MMF) using a wavelength of 850nm via a MTP/MPO-12 connector.
This transceiver is compliant with IEEE 802.3bm 100GBASE-SR4 and CAUI-4 standard.

Highlights

SFP28 transceiver provides 25GBase-LR throughput up to 10km over single mode fiber (SMF)
using a wavelength of 1310nm via an LC duplex connector. Featuring low power consumption,
high speed, this 25G transceiver is ideal for 25G Ethernet, telecom, and data center.

Highlights

25Gb/s serial optical interface
850nm VCSEL transmitter, PIN photo-detector
Advanced firmware allow customer system encryption information to be stored in transceiver
Cost effective SFP28 solution, enables higher port densities and greater bandwidth

Highlights

Built-in Marvell Chip, Max. Power Consumption 2.5W
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Multi-rate 10M/100M/1G/2.5G/5G/10Gbps on Line Port with USXGMII Interface
Terminated RJ45 Connectors, Allowing 10G Bandwidth over Cat6a/7 Cable
Hot Pluggable SFP+ MSA , IEEE 802.3az Compliant

Networking: T1/E1 x 2
Expansion / Connectivity: 2 x T1/E1
Miscellaneous: CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3,EN55024,
EN55022 Class A, UL 60950, EN50082-1, EN 61000-4-2, EN 61000-4-3,AS/NZ 3548 Class A,
ICES-003 Class A, EN 61000-6-2, FCC CFR47 Part 15,IEC 60950-1, EN 60950-1, AS/NZS 60950,
GR-1089-CORE,CAN/CSA C22.2 No. 60950, VCCI Class A, GR-63-CORE
Dimensions & Weight: 8.89 cm
Cisco Fourth-Generation Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module
Expansion module - T1/E1 x 2 - T-1/E-1 - for Cisco 4451-X

Networking: FXS/DID x 2
Expansion / Connectivity: 2 x FXS/DID
Miscellaneous: VCCI, CISPR 24, CISPR 22, DR PTC220, CS-03, AS/ACIF S002,
KN22, EN61000-3-2:2006, EN 300 386 V1.6.1, EN 55022:2010, ICES-003 issue 5, TIA-968-B
Software / System Requirements: Cisco IOS XE 16.5 and above
Cisco Network Interface Module - Expansion module - FXS/DID x 2 - for Cisco 4451-X;
Integrated Services Router 4221, 4321, 4331, 4351, 4431

Networking: FXS/DID x 2 + FXO x 4
Expansion / Connectivity: 2 x FXS/DID
Miscellaneous: VCCI, CISPR 24, CISPR 22, DR PTC220, CS-03, AS/ACIF S002,
EN 61000-3-2:2006, KN22, EN 300 386 V1.6.1, EN 55022:2010, ICES-003 issue 5,
TIA-968-B
Software / System Requirements: Cisco IOS XE 16.5 and above
Cisco Network Interface Module - Expansion module - FXS/DID x 2 + FXO x 4
for Integrated Services Router 4221, 4321, 4331, 4351, 4431

SFP-H10GB-ACU7M=

Power Rating 10kVA/10kW
Input Voltage Range 100 ~ 280V (Single phase, 2-wire + G)
Nominal Frequency 40 ~ 70 Hz
Output Voltage 200, 208, 220, 230, 240 Vac (Single phase)
Dimensions (W x D x H) 440 x 750 x 218 mm

Power Rating 8kVA/8kW
Input Voltage Range 100 ~ 280V (Single phase, 2-wire + G)
Nominal Frequency 40 ~ 70 Hz
Output Voltage 200, 208, 220, 230, 240 Vac (Single phase)
Dimensions (W x D x H) 440 x 750 x 218 mm
Weight 85.5 kg