ผลการค้นหา

Wi-Fi radio specifications
AP type: Indoor, dual-radio/tri-band 2.4GHz, 5GHz and 6GHz (dual concurrent) 802.11ax 2x2 MIMO
2.4GHz radio: Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate
5GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate
6GHz radio: Two spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate

Highlights

25Gb/s serial optical interface
850nm VCSEL transmitter, PIN photo-detector
Advanced firmware allow customer system encryption information to be stored in transceiver
Cost effective SFP28 solution, enables higher port densities and greater bandwidth

Highlights

Supports rate from 1.25 Gb/ to 10.3 Gb/s bit rates
Optical interface compliant to IEEE 802.3ae
Electrical interface compliant to SFF-8431
1310nm DFB transmitter, PIN photo-detector
Applicable for 10km SMF connection
Hot Pluggable

Highlights

Max. Power Consumption 1W, and TO Packaging Features High Reliability
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Small 10G Form Factor for Greatest Density per Chassis
Support 4x10G Fan out and Easy Migration to 40G Platforms
Optical Interoperability with 10GBASE XENPAK, X2, and XFP Inte

Highlights

Built-in Marvell Chip, Max. Power Consumption 2.5W
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Multi-rate 10M/100M/1G/2.5G/5G/10Gbps on Line Port with USXGMII Interface
Terminated RJ45 Connectors, Allowing 10G Bandwidth over Cat6a/7 Cable
Hot Pluggable SFP+ MSA , IEEE 802.3az Compliant

Networking: T1/E1 x 2
Expansion / Connectivity: 2 x T1/E1
Miscellaneous: CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3,EN55024,
EN55022 Class A, UL 60950, EN50082-1, EN 61000-4-2, EN 61000-4-3,AS/NZ 3548 Class A,
ICES-003 Class A, EN 61000-6-2, FCC CFR47 Part 15,IEC 60950-1, EN 60950-1, AS/NZS 60950,
GR-1089-CORE,CAN/CSA C22.2 No. 60950, VCCI Class A, GR-63-CORE
Dimensions & Weight: 8.89 cm
Cisco Fourth-Generation Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module
Expansion module - T1/E1 x 2 - T-1/E-1 - for Cisco 4451-X

Networking: Combo Gigabit SFP x 2
Expansion / Connectivity: 2 x 1000Base-T - RJ-45
Dimensions & Weight: 8.9 cm, Environmental Parameters: 0 °C
Cisco WAN Network Interface Module - Expansion module
combo Gigabit SFP x 2 - for Cisco 4451-X

Networking: FXS/DID x 2
Expansion / Connectivity: 2 x FXS/DID
Miscellaneous: VCCI, CISPR 24, CISPR 22, DR PTC220, CS-03, AS/ACIF S002,
KN22, EN61000-3-2:2006, EN 300 386 V1.6.1, EN 55022:2010, ICES-003 issue 5, TIA-968-B
Software / System Requirements: Cisco IOS XE 16.5 and above
Cisco Network Interface Module - Expansion module - FXS/DID x 2 - for Cisco 4451-X;
Integrated Services Router 4221, 4321, 4331, 4351, 4431

Networking: FXS/DID x 2 + FXO x 4
Expansion / Connectivity: 2 x FXS/DID
Miscellaneous: VCCI, CISPR 24, CISPR 22, DR PTC220, CS-03, AS/ACIF S002,
EN 61000-3-2:2006, KN22, EN 300 386 V1.6.1, EN 55022:2010, ICES-003 issue 5,
TIA-968-B
Software / System Requirements: Cisco IOS XE 16.5 and above
Cisco Network Interface Module - Expansion module - FXS/DID x 2 + FXO x 4
for Integrated Services Router 4221, 4321, 4331, 4351, 4431