ผลการค้นหา

Highlights

Built-in Broadcom 7nm DSP Chip, Max. Power Consumption 19W
Parameter Tests for Superior Performance, Quality, and Reliability
Dual-interface Design Enables Flexible 2x 400G or 8x 100G Breakout Networking
Supports the Use of a Single Port for 1x 400G Applications
8x 106.25G PAM4 Retimed 8x 100GAUI-1 C2M Electrical Interface
High-speed Connectivity Compliant to IEEE P802.3ck and IEEE 802.3cu
Hot Pluggable QSFP-DD MSA Compliant

Highlights

The 400GBASE-SR4 module, MTP/MPO-12 connector, up to 100m over parallel OM4 multi-mode fiber.
It is compliant to IEEE 802.3bs protocol and 400GAUI-8 standard.
The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane.
It can support 2 x 200G-SR and 4 x 100G-SR.

Highlights

The Tconnect TCM200GSR8 Compatible QSFP-DD transceiver supports up to 100m link lengths
over multimode fiber (MMF) via MTP/MPO-24 connectors.
This transceiver is compliant with IEEE 802.3bm and QSFP-DD MSA standards. The built-in
digital diagnostics monitoring (DDM) allows access to real-time operating parameters.
It is suitable for 2×100GBASE-SR4 Ethernet, Data Centers and Switch & Router Connections.

Highlights

QSFP28 MSA compliant, 4 CWDM lanes MUX/DEMUX design
Supports 103.1Gb/s aggregate bit rate
100G CWDM4 MSA Technical Spec Rev1.1
Up to 2km transmission on single mode fiber (SMF) with FEC
4x25G electrical interface (OIF CEI-28G-VSR)
Maximum power consumption 3.5W, LC duplex connector

Highlights
Supports up to 25.78Gbps bit rates
Hot-pluggable SFP+ footprint
1270nm DFB laser and PIN photodiode, Up to 10km for SMF transmission
Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle
Single +3.3V power supply
Real Time Digital Diagnostic Monitoring

Highlights
Supports up to 25.78Gbps bit rates
Hot-pluggable SFP+ footprint
1330nm DFB laser and PIN photodiode, Up to 10km for SMF transmission
Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle
Single +3.3V power supply
Real Time Digital Diagnostic Monitoring

Highlights

SFP+ transceiver supports up to 40km link lengths over OS2 SMF via an LC duplex connector. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Each SFP+
transceiver module is individually tested to be used on a series of Cisco switches, routers, servers,
network interface card (NICs) etc.

Highlights

Supports rate from 1.25 Gb/ to 10.3 Gb/s bit rates
Optical interface compliant to IEEE 802.3ae
Electrical interface compliant to SFF-8431
Hot Pluggable 1310nm DFB transmitter, PIN photo-detector
Low power consumption
Applicable for 2km SMF connection

Highlights

compatible SFP+ transceiver supports up to 10km link lengths over OS2 SMF via an LC simplex connector.
This 10G BiDi SFP+ transceiver, featured with data transmission over a single strand of fiber,
the one transceiver transmits a 1330-nm channel and receives a 1270-nm signal, whereas the
other BiDi SFP+ optics transmits at a 1270-nm wavelength and receives a 1330-nm signal.

Highlights

compatible SFP+ transceiver supports up to 10km link lengths over OS2 SMF via an LC simplex connector.
This 10G BiDi SFP+ transceiver, featured with data transmission over a single strand of fiber,
the one transceiver transmits a 1270-nm channel and receives a 1330-nm signal, whereas the
other BiDi SFP+ optics transmits at a 1330-nm wavelength and receives a 1270-nm signal.