ผลการค้นหา

SFP-FE-SX-MM1310-A

Key features
Unlocks the 6 GHz band to more than double the available capacity
Comprehensive tri-band coverage across 2.4 GHz, 5 GHz, and 6 GHz to deliver 3.9 Gbps maximum
Up to seven 160 MHz channels in 6 GHz support low-latency
Unique Ultra Tri-Band (UTB) filtering enables 5 GHz and 6 GHz

Wi-Fi radio specifications
AP type: Indoor, dual-radio/tri-band 2.4GHz, 5GHz and 6GHz (dual concurrent) 802.11ax 2x2 MIMO
2.4GHz radio: Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate
5GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate
6GHz radio: Two spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate

Highlights

QSFP28 optical transceiver module is designed for use in 100GBASE Ethernet throughput up to 40km
over single-mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors.

Highlights

Hot pluggable QSFP28 MSA form factor, Compliant to IEEE 802.3ba 100GBASE-LR4
Up to 10km reach for G.652 SMF, Single +3.3V power supply
Transmitter: cooled 4x25Gb/s LAN WDM EML
TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)
Receiver: 4x25Gb/s PIN ROSA, Duplex LC receptacle
4x28G Electrical Serial Interface (CEI-28G-VSR)

Highlights

QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 100m
over OM4 multimode fiber (MMF) using a wavelength of 850nm via a MTP/MPO-12 connector.
This transceiver is compliant with IEEE 802.3bm 100GBASE-SR4 and CAUI-4 standard.

Highlights
4 channels full-duplex transceiver modules, Transmission data rate up to 10.5Gbps per channel
4 channels 850nm VCSEL array, 4 channels PIN photo detector array
Low power consumption <1.5W, Hot Pluggable QSFP form factor
Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
Single MPO connector receptacle, Built-in digital diagnostic functions
3.3V power supply voltage

Highlights

25Gb/s serial optical interface
850nm VCSEL transmitter, PIN photo-detector
Advanced firmware allow customer system encryption information to be stored in transceiver
Cost effective SFP28 solution, enables higher port densities and greater bandwidth

Highlights

Built-in Marvell Chip, Max. Power Consumption 2.5W
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Multi-rate 10M/100M/1G/2.5G/5G/10Gbps on Line Port with USXGMII Interface
Terminated RJ45 Connectors, Allowing 10G Bandwidth over Cat6a/7 Cable
Hot Pluggable SFP+ MSA , IEEE 802.3az Compliant

Networking: T1/E1 x 2
Expansion / Connectivity: 2 x T1/E1
Miscellaneous: CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3,EN55024,
EN55022 Class A, UL 60950, EN50082-1, EN 61000-4-2, EN 61000-4-3,AS/NZ 3548 Class A,
ICES-003 Class A, EN 61000-6-2, FCC CFR47 Part 15,IEC 60950-1, EN 60950-1, AS/NZS 60950,
GR-1089-CORE,CAN/CSA C22.2 No. 60950, VCCI Class A, GR-63-CORE
Dimensions & Weight: 8.89 cm
Cisco Fourth-Generation Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module
Expansion module - T1/E1 x 2 - T-1/E-1 - for Cisco 4451-X