ผลการค้นหา

Highlights

The 400GBASE-DR4 module, MTP/MPO-12 connector, up to 500m over parallel single-mode fiber.
It is compliant with QSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards.
The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane.
It can be used as 4x100G breakout to QSFP-DR-100G. It is a cost-effective and lower power
consumption solution for 400GBASE data center.

Highlights

The Tconnect TCM200GSR8 Compatible QSFP-DD transceiver supports up to 100m link lengths
over multimode fiber (MMF) via MTP/MPO-24 connectors.
This transceiver is compliant with IEEE 802.3bm and QSFP-DD MSA standards. The built-in
digital diagnostics monitoring (DDM) allows access to real-time operating parameters.
It is suitable for 2×100GBASE-SR4 Ethernet, Data Centers and Switch & Router Connections.

Highlights

Hot-pluggable QSFP-DD form factor
4 channels full-duplex transceiver module
Transmission data rate up to 212.5Gb/s
4x50G PAM4 EML LAN-WDM transmitter and PIN receiver
Low power consumption < 7W
Maximum link length of 40km on SMF
Duplex LC receptacles

Highlights

Hot-pluggable QSFP-DD form factor
4 channels full-duplex transceiver module
Transmission data rate up to 212.5Gb/s
4x50G PAM4 EML LAN-WDM transmitter and PIN receiver
Low power consumption < 7W
Maximum link length of 10km on SMF
Duplex LC receptacles

Highlights

QSFP28 optical transceiver module is designed for use in 100GBASE Ethernet throughput up to 100km
over single mode fiber (SMF) using a wavelength of 1310nm via duplex LC connectors.

Highlights

QSFP28 MSA compliant, 4 CWDM lanes MUX/DEMUX design
Supports 103.1Gb/s aggregate bit rate
100G CWDM4 MSA Technical Spec Rev1.1
Up to 2km transmission on single mode fiber (SMF) with FEC
4x25G electrical interface (OIF CEI-28G-VSR)
Maximum power consumption 3.5W, LC duplex connector

Highlights

Full-duplex transceiver integrated module in SFP56 hot-pluggable package
Single channel 850nm VCSEL and PIN,Transmission rate up to 53.125Gbps (50G PAM4)
Compliant with SFP56 MSA and IEEE 802.3cd 50GBASE-SR Ethernet transmission protocol
Compatible with 50G eCPRI transmission protocol, Using 1 pair of multimode fiber transmission,
the distance can reach up to 70m (OM3) or 100m (OM4)

Highlights
The QSFP+ module adopts 12 Fibers MTP/MPO Male connectors, reaching a link up to 150m
over OM4 MMF (100m over OM3). This transceiver is compliant with QSFP+ MSA,
IEEE 802.3ba 40GBASE-SR4 and breakout to 4x10GBASE-SR standard.

Built-in Marvell Chip, Max. Power Consumption 1.2W
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Compact RJ-45 Connector Assemblies Ensure Uninterrupted Network Connectivity
Hot Pluggable SFP MSA Compliant to Maximize Uptime and Simplify Maintenance
Support Real-time Configuration, Fully Metallic Enclosure for Low EMI

Features

Data-rate of 1.25Gbps operation
850nm VCSEL laser and PIN photo detector
Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
Digital Diagnostic Monitoring:
Internal Calibration or External Calibration
550m transmission with 50/125µm MMF
300m transmission with 62.5/125µm MMF